The Pinnacle-KR802 II is composed of:
1x Thunder-KS4P I passive subwoofer
1x Thunder-KS4 I active subwoofer
4x Kayman-KY102 stainless steel line array element with 4" drivers
4x K-JOINT3
2x K-FOOT3
The self-powered Thunder-KS4 I subwoofers with DSP are designed to be the core devices in the sound reinforcement system: the dedicated K-array Connect mobile app provides a user-friendly interface for the remote control, the DSP parameters and to boost the system performance.
K-framework3 is the managing and control software dedicated to professionals and operators looking for a powerful tool for designing and managing a large number of units over a wired LAN in demanding applications.
Kayman-KY102
General
-
Type:
Line array
-
Transducers:
8 x 4" neodymium magnet woofers
-
Frequency Response:
120 Hz – 20 kHz (-6 dB)
(1) -
Max SPL:
138 dB (peak)
(2) -
Rated Power:
1200 W
-
Coverage:
V. 7° - 30° | H. 90°
-
Connectors:
SpeakOn NL4 1+ 1- (signal); 2+ 2- (through)
-
Nominal Impedance:
8 Ω / 32 Ω selectable
-
Max SPL (Full-Range preset):
126 dB (peak)
(3) -
Frequency Response (Full-range preset):
70 Hz – 20 kHz (-6 dB)
(4)
Handling and Finishes
-
Dimensions (W x H x D):
116 x 1000 x 134 mm (4.6 x 39.4 x 5.3 in)
-
Weight:
14.9 kg (32.8 lb)
-
Material:
Stainless Steel
-
Colors:
Black, White, Custom RAL
-
Finishes:
24K Gold, Polished, Brushed
Regulations
-
IP Rating:
IP64
(5)
- (1) With dedicated preset.
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
- (3) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
- (4) The specified frequency range applies only when using the dedicated FULL-RANGE preset. This preset is available exclusively on 4-channel amplifiers or amplifiers equipped with firmware EBS.
- (5) More complete water protection with K-IP65KITA and K-IP65KITB accessories (IP65 compliant)
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Thunder-KS4P I
General
-
Type:
Passive subwoofer
-
Transducers:
2 x 18" neodymium magnet woofer
-
Frequency Response:
30 Hz – 150/450 Hz (-6 dB) crossover dependant
(1) -
Crossover:
DSP-controlled, Low Pass @ 150 Hz, preset dependant
-
Max SPL:
141dB
(2) -
Coverage:
Omni
-
Rated Power:
2800W peak
-
Connectors:
2x speakON 2+ 2- / 1+ 1- link
-
Nominal Impedance:
4ohm
Handling and Finishes
-
Dimensions (W x H x D):
1106 x 500 x 580 mm
(43.5 x 19.7 x 22.8 in)(3) -
Weight:
53,2 kg (117.3 lb)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black/White/Custom RAL
Regulations
-
IP Rating:
IP54
(4)
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Included 17 mm (0.7 in) removable rubber feet
- (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Thunder-KS4 I
General
-
Type:
Active subwoofer
-
Transducers:
2 x 18" neodymium magnet woofer
-
Frequency Response:
30 Hz – 150/450 Hz (-6 dB) crossover dependant
(1) -
Crossover:
DSP-controlled, Low Pass @ 150 Hz, preset dependant
-
Max SPL:
141 dB
(2) -
Coverage:
Omni
-
Connectors:
Line Input
2x XLR-F analog / AES3
Line Output
2x XLR-M Link analog / AES3
Speaker Output
2x SpeakON NL4
Mains
powerCON TRUE1 TOP
Networking and Data
1x RJ45
4x USB-A -
Nominal Impedance:
4ohm subwoofer
-
Controllers:
Wi-Fi dedicated Mobile APP
K-framework3 via wired Ethernet connection -
Built-in DSP:
Input gain, routing matrix, delay, full parametric IIR filters (Peaking, Shelving, Hi/ Lo pass, Hi/Lo Butterworth), Onboard preset, Remote monitoring
Handling and Finishes
-
Dimensions (W x H x D):
1106 x 500 x 580 mm
(43.5 x 19.7 x 22.8 in)(3) -
Weight:
60 kg (132.3 lb)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black/White/Custom RAL
Regulations
-
IP Rating:
53
(4)
Amplifier
-
Amp Module:
4-ch Class D
-
Output Power:
4 x 2500W @ 4ohm
(5) -
Power Consumption:
600 VA @ 8 Ω load, Pink noise, 1/8 rated power
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Included 17 mm (0.7 in) removable rubber feet
- (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.
- (5) CTA-2006 Standard single channel driven
New materials and design are introduced into existing products without previous notice.
CONTROL 4
Integrating K-array's latest electronics with any Control4 system has become easy.
Crestron Home
Make K-array ultra-sleek and unique products get along with your Crestron Home Control System.
Crestron
The plug-in that gives your Crestron Electronics full control on K-array amps is finally out there!
AMX by Harman
K-array's latest electronics can be easily controlled by AMX modules as well now.
Dante Ready
K-array's Dante Ready, a licensing program by Audinate.
Download the Dante Controller for free!
Downloads
EASE & EASE FOCUS DATA
Ver 9.0
Pinnacle-KR Assembly Manual
v.3
KR802-804 II DATASHEET
ver 2.1
Dante Ready Activation Guide
CRESTRON HOME plug-in
CRESTRON plug-in
WEB APP Quick Start Guide
Q-SYS Plug-in
Rev 1.0.0
KR802 II DWG 3D
PINNACLE MARK II SYSTEM CONFIGURATIONS
KFramework3 v3.3.6 Osx
Ver. 3.3.6
KFramework3 v3.3.6 Windows
Ver. 3.3.6
Related accessories
Case Studies
Vinicio Capossela 'Ballate per Uomini e Bestie' Tour
With so many column audio systems in the market, it is never easy to find the right balance of performance and price in...
View Details